Burglary-resistant (RC 2), thermally insulating, draft-resistant, weather-resistant & sound-absorbing

Insulating Sliding Doors

Heat insulation is a core element in the construction sector. While roofs, walls and windows have been provided with insulating material for decades, with automatic sliding doors, a heat exchange between the inside and the outside of the building still takes place in closed condition – even if insulating glass is used. Pressure differences between the indoor and outdoor ranges inevitably lead to considerable heat exchange, while on the other hand cooled or heated air flows out uncontrollably.

The dynamic effects on the door leaves require special measures, so that until now it was not possible to keep the dimensions of thermally separated frames small. For example, the systems currently available on the market are often extremely solid. These thermally separated profiles – derived from façade construction – therefore form a compromise optically.

Record THERMCORD

Automatic linear door system with heat-insulating properties

The Record THERMCORD is powered by modules of the Record STA 20 series. This is one of the most modern systems on the market and, thanks to the numerous parameter modifications, can always be optimized for each application. As a result, the opening and closing speed can be specifically adjusted so that the heat exchange takes place as little as possible.

The complete system is digitally linked. This means that the control unit, the drive, the sensors and the multifunctional program switch BDE-D communicate with each other via the CAN-bus protocol. The potentially high data transfer rate makes a continuous self-diagnosis possible. The results can be read from the memory. Interference influences are detected in this way and defective parts or interrupted cable connections are identified immediately.

All benefits at a glance

  • Effective thermal barrier despite narrow door profiles of only 38 mm depth
  • Optically aligned with Record standard profiles
  • Suitable as indoor and outdoor application
  • UD value to only 1.3 W / m²K according to EN 16 361
  • Universally applicable drive system Record STA 20 series drives
  • Multifunction program switch BDE-D for easy operation.
  • Equipped with self-testing electrical components for maximum reliability and safety.
  • Also applicable for escape routes
  • Self-supporting construction
  • Short payback time.

Record THERMCORD RC 2

The Record THERMCORD RC 2 is power

ed by modules of the Record STA 20 series. This is one of the most modern systems on the market and, thanks to the numerous parameter modifications, can always be optimized for each application. As a result, the opening and closing speed can be specifically adjusted so that the heat exchange takes place as little as possible.

The complete system is digitally linked. This means that the control unit, the drive, the sensors and the multifunctional program switch BDE-D communicate with each other via the CAN-bus protocol. The potentially high data transfer rate makes a continuous self-diagnosis possible. The results can be read from the memory. Interference influences are detected in this way and defective parts or interrupted cable connections are identified immediately.

All benefits at a glance

  • Burglary resistance class WK 2 according to the EN 1627 for increased safety requirements.
  • Burglar-resistant safety glass class P5A according to EN 356.
  • A thermally separated door frame prevents any heat exchange between the inside and outside of the building.
  • UD value to only 1.3 W / m² K according to EN 16 361.
  • Electronic multi-point locking system (MPV) for easy locking at the touch of a button.
  • Recessed floor guide system with guide sieves over the full width.
  • Universally applicable drive system Record STA 20 series drives.
  • Multifunction program switch BDE-D for easy operation.
  • Equipped with self-testing electrical components for maximum reliability and safety.
  • Innovative sealing system for increased air tightness (optional).
  • Short payback time

Record THERMCORD+

Automatic sliding door system with extra insulating properties

The Record THERMCORD + is powered by modules of the Record STA 20 series. This is one of the most modern systems on the market and, thanks to the numerous parameter modifications, can always be optimized for each application. As a result, the opening and closing speed can be specifically adjusted so that the heat exchange takes place as little as possible.

The complete system is digitally linked. This means that the control unit, the drive, the sensors and the multifunctional program switch BDE-D communicate with each other via the CAN-bus protocol. The potentially high data transfer rate makes a continuous self-diagnosis possible. The results can be read from the memory. Interference influences are detected in this way and defective parts or interrupted cable connections are identified immediately.

All benefits at a glance

  • Effective thermal barrier despite slender door profiles of only 38 mm depth.
  • UD value to only 1.1 W / m² K according to EN 16 361.
  • Active seal on the floor side.
  • Mechanical seal on the top.
  • Draft and waterproof.
  • Universally applicable drive system Record STA 20 series drives.
  • Multifunction program switch BDE-D for easy operation.
  • Equipped with self-testing electrical components for maximum reliability and safety.
  • Can be retrofitted with automatic door systems with THERMCORD profile systems.
  • Self-supporting construction.
  • Short payback time.

Automatic Doors Projects